Re: [Chrysler300] 300 G Exhaust

[Bob Merritt <bob@xxxxxxxxxxxxx>]

I think the shop that bought the business from Mrs Brass is

Broughton's Service Center, Rt. 278S-414W, Morris, PA., 16938 (570) 
353-2510.


Aside, I'll echo Pete's comment -- when you get an exhaust
that fits without tweaking, you are lucky. A system from even
the best shop can need a little re-work to fit.

Hiho
R




On 7/10/2012 7:13 AM, pffkllc@xxxxxxx wrote:
>
> When I bought my exhaust system for the G from Eileen, the driver's side
> pipe leaned up against the torsion bar. We heated it an hammered it until
> it was maybe 2" away. I called Eileen to let her know and suggested that
> they adjust the program they were using to shape the system, and she 
> referred
> me to the shop that was doing the pipes for her. I don't remember the
> name, but it was somewhere near her in the Philadelphia area. Kepich 
> advises
> me that they have never had a shop in Pennsylvania, so I doubt that they
> were the makers.
>
> Pete Fitch
>
> In a message dated 7/9/2012 6:33:43 P.M. Eastern Daylight Time,
> awrdoc@xxxxxxxxx <mailto:awrdoc%40yahoo.com> writes:
>
> Hi to all,
>
> I bought a system thru Eileen and presume that Kepich did it. It was not
> mandrel bent. Something that I would insist on today.
>
> I have purchased custom mufflers from Waldron and was well pleased.
>
> When ordering from either of these sources, you should inquire about
> mandrel
> bent curves for better flow. Ordering your system in stainless will be
> beneficial, especially if the vehicle is stored on concrete in a cold
> unheated building.
>
> Tony Rinaldi,
>
> 300-F Conv¹t
>
> From: Marshall Larson <_granitledge@xxxxxxxxx 
> <mailto:_granitledge%40gmail.com>_
> (mailto:granitledge@xxxxxxxxx <mailto:granitledge%40gmail.com>) >
> Date: Mon, 9 Jul 2012 11:59:19 -0500
> To: Chrysler 300 Club <_Chrysler300@xxxxxxxxxxxxxxx 
> <mailto:_Chrysler300%40yahoogroups.com>_
> (mailto:Chrysler300@xxxxxxxxxxxxxxx 
> <mailto:Chrysler300%40yahoogroups.com>) >
> Subject: Re: [Chrysler300] 300 G Exhaust
>
> I believe it is a company called Kepich Exhaust that is continuing the
> systems that Eileen sold.
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> 
>
> No virus found in this message.
> Checked by AVG - www.avg.com <http://www.avg.com>
> Version: 2012.0.2195 / Virus Database: 2437/5123 - Release Date: 07/10/12
>




[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/