Re: {Chrysler 300} Intake manifold insulation
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Intake manifold insulation




I've used tin foil and fiberglass insulation in the past, and they held up fine. If they are collecting oil, dirt and water, maybe the leaks should be fixed. They are being reproduced now, although they repeat much of the same miss-information. https://www.performancecargraphics.com/Manifold_Insulation.htm The intake should actually run cooler without it. There is a reason why there are air gap manifolds for lesser cars. The small block Mopar's intake sits right on top of the lifter valley. I think they have a plate fastened to the manifold to keep direct oil splash off. 
Don


That is a much thicker gage of foil they used and yes all they do is collect grime, oil and dirt and water. Would be pretty hard to reproduce without the correct foil and proper dense mineral wool fiber deadening, I'm thinking and to what benefit? I've seen those actually rot through a bathtub intake gasket which is bad news, so I always discard those anytime I crack an engine open or pull an intake. Just my two cents...
Kevin


From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of Finsruskw@xxxxxxxxxxxxxxx <finsruskw@xxxxxxxxxxxxxxx>
Sent: Monday, June 9, 2025 5:14:04 PM
To: Donald Verity <chryslerdon@xxxxxxx>
Cc: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>; ALLAN POZDOL <apozdol@xxxxxxxxxxx>
Subject: Re: {Chrysler 300} Intake manifold insulation
 
Don nailed it!
Make your own,
 Got tin foil? 
Know anyone rehabbing or building a house?
Look in their dumpster, probably find some scraps.

From: "Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
To: "Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>, "ALLAN POZDOL" <apozdol@xxxxxxxxxxx>
Sent: Monday, June 9, 2025 5:58:40 PM
Subject: Re: {Chrysler 300} Intake manifold insulation

It's not insulation, it's sound deadening. 
Don




What are opinions on using the insulation between the intake manifold and the valley pan? 
Most seem to end up missing, like mine did with only a remnant remaining.
 
Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/596769106.99553.1749491730575%40connect.xfinity.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1939692284.929861.1749509920406%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/654538803.859532.1749510844831.JavaMail.zimbra%40windstream.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/2128067153.935319.1749513591102%40mail.yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.