Spoke to Jeff Carter. Its the wires WITHIN the Speedometer head.
-- 2 wires feed the Odometer. 1 wire feeds the Speedometer Face 1 wire feeds the Pointer Needle I need to pull the Speedometer out….. Carefully push the feed wire into the Speedo (via its rubber grommet). Carefully unwrap the 63 year old electrical wrap tape. Resolder the wires, re-wrap them, re-grommet them, reinstall the world. Yay! Oh…He said the whine IS from the Power Pack & should go away once the Speedo & Pointer light up…. Thus helping pull more power FROM the power pack. But I will most likely pull the Power Pack & bench test the illumination before I reassemble it all. Thanks to you both for your thoughts & info!! Matt Allyn
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/E3E995B3-BF89-4980-B4E8-D72A0E8EC167%40yahoo.com. |