{Chrysler 300} Rocker slop

["'Jay Williamson' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Decided to do a checkup on the valve train while I was this deep into the valve cover gaskets replacement. Wondering if this much slop is normal between rockers or should I look into adding shims? Thanks in advance for your input
Jay Williamson
317-223-1379

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/7B16C20B-03FC-4593-910C-FD27F6EB7A65%40icloud.com.

Attachment: Video.mov
Description: QuickTime movie

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/7B16C20B-03FC-4593-910C-FD27F6EB7A65%40icloud.com.