[Chrysler300] inlet valves and springs for 392

["black58hemi" <barlowdavidt@xxxxxxx>]

hello everyone.
i have just dismantled the heads on my 300D and need a set of intake 
valves. does anyone know of a supplier for them? i have contacted my 
parts supplier here in the UK but they only list exhaust valves.
Also the intake valves only have a single valve spring with the surge 
damper, am i right in thinking it should have double springs like the 
exhaust?
best regards
david.



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/