[Chrysler300] a/c freon

[tdcox@xxxxxxxxxxxxx]

Hey Rob, Dan et. al.

I installed a new rotary compressor on my 56 Imperial with 134A; I have front and rear A/C like Rob in a single loop. It does not cool well. Also, I have had to install two ugly (plastic) cooling fans in front of the condensor, I am told, because the R134 requires additional cooling to  operate properly.

Can I switch the freon in the new compressor to R-12 for improved cooling and also to remove the cooling fans? The original A/C on 56's did not have an auxiliary cooling fan and I would like to have that "look" and the extra cold air. Thoughts?

Thanks. Tom Cox


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/