[Chrysler300] seet belts (boring)

[james mcmullan <macthehammerjim@xxxxxxxxx>]

Some of you seam to have a entrust. I looked at the belts in my F .There was a label -hears the info. in scrip-.positively finer-below that -HICKOK SM-1960-below- Low Elongation Web- below American Safety Equipment Corp Materials 5000 lb.meats requirements of G.S.A.fed spec Meets  SAE -J4 Appears to be dark gray heavy nylon weave .They are 2 inches wide ,the male side of the buckle is a blade with two square holes that push into a quick realise clasp.they are mounted with two opposed swivel plates which clip into a heavy eye bolt that goes Thur the floor boards and fastened Whit a large washer and a nut.Jim McMullan 300 F 

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/