Re: [Chrysler300] RE: Hemi plug wire sets

["RLS" <obiwan10@xxxxxxxxxxx>]

I used wire set from mid 80's BMW 6 and 7 series engines.  Expensive but higher quality(do not use prone to cracking bakelite for insulators and are well shielded for radio interference) than Chrysler wire set and fit perfectly.  Of course BMW is 6 cylinder, so you have to work this out probably by buying 2 sets.  Perhaps you can team up with other members who need wires.  Buy 4 sets, good for 3 v8's.  Perhaps 4 cylinder 3 series autos use same wiring and one could purchase 2 sets for your hemi.  Don't remember if this will get you all proper lengths for each though.  I do not know how pricing compares to Mopar wiring retailers.

http://www.bavauto.com/shop.asp  Example of supplier

Roger Schaaf 



  ----- Original Message ----- 
  From: Gary Nelson 
  To: Chrysler300 
  Sent: Wednesday, April 23, 2008 9:21 AM
  Subject: [Chrysler300] RE: Hemi plug wire sets


  Hello All

  Anyone have a source for hemi plug wire sets using original wire diameter. 

  Thank you,
  Gary, the parts doc
  Reno, Nevada 89521 USA
  The Biggest Little City In The World
  Mail: garythepartsdoc@xxxxxxxxxxxx



   

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/