Re: [Chrysler300] Re:'short' long rams

[Paul Holmgren <paulholm@xxxxxxxxxxxxx>]

Don Verity wrote:
> The casting #''s for the 63-64 short rams are 2129986 & 2129987. The secondary bores are also larger than the long ram type, although the carbs have the same bore. On an interesting note, I also have a Buick 425 with the dual quad set-up. The carter carbs on these have a larger bore than the 2903's. I'll get the specs if anyone is interested.
> 300ly,
>  Don

Try And Remember, The whoosh of September, the carbs on the cross ram 
413's ONLY fed 207.4 cubic inches EACH.  the 2903's and like sized carbs 
were only feeding a small motor per carb, they were very capable of 
handling the 4 cylinders.

the stock inline 2x4 mannyfolder intakes were setup where each carb 
contributed to the full 8 cylinders so the carbs were sized differently.

-- 
Paul Holmgren
Mine: 2 57 300-C's in Indy
Hers: 05 PT GT R/T HO
Hoosier Corps L#6


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/