Re: [Chrysler300] Torque spec for 300H
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Torque spec for 300H



Torque spec for the H should be 450ft-lb at 3600rpm
J.Yves
  ----- Original Message ----- 
  From: Mark Souders 
  To: Chrysler300@xxxxxxxxxxxxxxx 
  Sent: Thursday, April 23, 2009 12:26 PM
  Subject: [Chrysler300] Torque spec for 300H






  Guys,

  What is the torque spec for the '62 413 in my H? I have conflicting reports of 450 and 495 ft-lb. at 2800 RPM.

  Thanks,
  Mark

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.