RE: [Chrysler300] 300C Hood underside
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 300C Hood underside



The outer panels of the car have already been resrayed, no harm in cleaning up under the hood with a respray as well, especially if you can match it to the original look from the factory......or the intended look from the factory. (I'm sure the factory would have preferred the outcome were better in many cases)

 

Just my 1.9 cents (CDN)

Ryan Hill 


 


To: Chrysler300@xxxxxxxxxxxxxxx
From: kboonstra@xxxxxxxxxxxx
Date: Fri, 4 Dec 2009 21:49:01 +0000
Subject: [Chrysler300] 300C Hood underside

  



The recent discussion of hood undersides on the C300 & 300B reminds me to ask all you folks about achieving a good result for my 300C. The whole car was painted on the frame in 1981 by a previous owner, and I am just beginning the process of tackling a dressup job under the hood. BTW that old exterior paint job still looks pretty darn good. But what exists now underhood is some factory paint in halfway respectable condition, some mismatches such as chrome valve covers and AFB carbs, and some overspray from the repaint job - along with, of course, the "just kinda shoot some color on everything in the way of the gun without worrying too much about it" approach taken at the factory.

I want to have this car for fun, and I don't have a desire to do a trailer queen job that should never see the pavement again. But on the other hand I want to have it look sharp and pretty much correct under the hood at the same time.

Right now the bottom side of the hood has a pad installed, which I believe is a "never" item on a 300C. And the steel that I can see without removing the pad looks like it's probably a somewhat thin paint coat applied at the factory.

My current plan is to remove the front clip so that we can do a pretty good job of accessing everything. We can flip the fenders upside down to fix up the wheel wells, etc. and we'll do a real nice job of painting the inner fenders, as well as the radiator support and front pan. And then we'll do as nice a job as we can on the cowl, the frame forward of the cowl, the engine without removing it, and all the accessories.

But back to the bottom of the hood ----
Should I remove the pad and then paint the entire thing nicely in Gauguin Red? Or would someone call it a sin to make it look nicer than the factory job?

Thanks for your help.

Keith Boonstra in Holland MI resting from shoveling the snow.




 		 	   		  
_________________________________________________________________
Windows Live: Friends get your Flickr, Yelp, and Digg updates when they e-mail you.
http://go.microsoft.com/?linkid=9691817

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.