
Re: [Chrysler300] 57 C Seat
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] 57 C Seat
- From: "loren nelson" <lorencnelson@xxxxxxxxxxx>
- Date: Sat, 26 Mar 2011 12:09:53 -0400
The seat on my G was doing something similar and the track and gear were frozen. It has rust problems so I assume the rust was to blame. I soaked the track and gear area with Liquid Wrench and, after soaking for a week or so, I used a big hammer and drift pin to loosen it. It took a lot of pounding back and forth, barely moving at first. Once it moved some I used the motor and assisted it with the hammer. It now runs back and forth, up and down but still will not tilt, which I assume is a different problem. The passenger side would move slightly with the motor before the hammer treatment.
Loren Nelson in rainy North Georgia
----- Original Message -----
From: JettLarry@xxxxxxx
To: chrysler300@xxxxxxxxxxxxxxx
Sent: Friday, March 25, 2011 2:12 PM
Subject: [Chrysler300] 57 C Seat
hello to all in 300 land.
Looking for a complete/operational power seat mechanism for
300 C. Unit in car will make noise for a few seconds and stop. Have had 2
shops that worked on the mechanism with no success (they still gave me a
bill).
All suggestions, ideas, etc appreciated.
gary gettleman
(gary.gettleman@xxxxxxxxx)
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
------------------------------------
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
Chrysler300-digest@xxxxxxxxxxxxxxx
Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap