Re: Re: [Chrysler300] 300F engine pull question

["charlies@xxxxxxxxxxxx" <charlies@xxxxxxxxxxxx>]

It can be done - did mine last year in my 62 Sport - it's tight and you need to get the front of the car up high enough. Charlie in Ottawa.

On May 15, 2011, Keith Simons <ksimons@xxxxxxxxxxxxxxxxx> wrote: 

With the car on the floor I would say no way. There will not be enough
clearance underneath. You will need an adjustable angle engine puller so you
can tilt the motor and trans. But that will mean that the front of the car
will need to be up on jack stand to get the clearance needed to achieve the
angle to clear the firewall and the radiator support.with the length of the
transmission.

On Sun, May 15, 2011 at 3:52 AM, <michaelvanderveen@xxxxxxxxxxxxxx> wrote:

>
>
> Hi mark im not sure about it with radiator support panel in but i did mine
> with radiator support panel out.
> Mike in aus.
> >-- Original Message --
> >To: "Chrysler 300 Club" <Chrysler300@xxxxxxxxxxxxxxx>
> >From: "Mark Schueller" <f41324@xxxxxxxxxxxxx>
> >Date: Sat, 14 May 2011 16:41:49 -0500
> >Subject: [Chrysler300] 300F engine pull question
> >Reply-To: "Mark Schueller" <f41324@xxxxxxxxxxxxx>
> >
> >
> >Hi All:
> >
> >I plan to pull the engine from my 300F. The manual says to remove the
> transmission
> >before pulling the engine. Is it possible to pull the engine with the
> transmission
> >on it with the radiator out or is the unit too long? The car will be on
> >the floor and I'll be using a hydraulic engine hoist. Thanks much.
> >
> >Mark Schueller
> >300C,F
> >
> >[Non-text portions of this message have been removed]
> >
>
> 
>


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links





------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/