RE: [Chrysler300] 1958 Chrysler 300D Upper Control Arm Bushings?????????
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 1958 Chrysler 300D Upper Control Arm Bushings?????????????



Thanks Dennis

Good work , I will give it a try



Larry@xxxxxxxxxx<mailto:L.jabin1007@xxxxxxxxxx>

From: skyhawk@xxxxxxxxx [mailto:skyhawk@xxxxxxxxx]
Sent: Monday, September 17, 2012 2:30 PM
To: Jean-Yves; 'David Schwandt'; Larry Jabin; Chrysler300@xxxxxxxxxxxxxxx
Subject: RE: [Chrysler300] 1958 Chrysler 300D Upper Control Arm Bushings?????????????

I checked a TRW Chassis parts book, circa 1979, for the proper number and size of a 58 300D upper control arm bushing.  The TRW number then was 12173, which was sized at 1.031 OD.  The 58 Windsor upper control arm busing has a smaller OD, at 0.937, and the TRW part number is 12168. If the catalogs show that the smaller bushing is correct, then the catalog (or computer) is wrong. Try to get a parts person to change this TRW number over to another brand and see what you can find.   Dennis
-----Original Message-----
From: Jean-Yves
Sent: Sep 17, 2012 4:51 PM
To: 'David Schwandt' , 'Larry Jabin' , Chrysler300@xxxxxxxxxxxxxxx<mailto:Chrysler300@xxxxxxxxxxxxxxx>
Subject: RE: [Chrysler300] 1958 Chrysler 300D Upper Control Arm Bushings?????????????



That's the first thing we thought of , but no way, they are
different...would have been too easy...there has to be some degree of
difficulty in fixing these old cars I guess.

J.Yves

From: Chrysler300@xxxxxxxxxxxxxxx<mailto:Chrysler300%40yahoogroups.com> [mailto:Chrysler300@xxxxxxxxxxxxxxx<mailto:Chrysler300%40yahoogroups.com>] On
Behalf Of David Schwandt
Sent: September-17-12 1:10 PM
To: 'Jean-Yves'; 'Larry Jabin'; Chrysler300@xxxxxxxxxxxxxxx<mailto:Chrysler300%40yahoogroups.com>
Subject: RE: [Chrysler300] 1958 Chrysler 300D Upper Control Arm
Bushings?????????????

Maybe '60 A-frames will interchange w/58's???

Dave Schwandt

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx<mailto:Chrysler300%40yahoogroups.com> <mailto:Chrysler300%40yahoogroups.com>
[mailto:Chrysler300@xxxxxxxxxxxxxxx<mailto:Chrysler300%40yahoogroups.com> <mailto:Chrysler300%40yahoogroups.com> ]
On
Behalf Of Jean-Yves
Sent: Monday, September 17, 2012 10:37 AM
To: 'Larry Jabin'; Chrysler300@xxxxxxxxxxxxxxx<mailto:Chrysler300%40yahoogroups.com>
<mailto:Chrysler300%40yahoogroups.com>
Subject: RE: [Chrysler300] 1958 Chrysler 300D Upper Control Arm
Bushings?????????????

We had the same problem with the 58 300D we restored. The bushings from
suppliers are 0.94 OD.

I do not recall the exact size of the bushings we removed, but they were
bigger than 0.94 , actually they were in between that 0.94 and the 1.13 size
of a 1960 bushing and we just could not find that particular 1958 size
bushing.

What we had to do is bring the upper control arms to a machine shop, they
oversize the bushing hole and then pressed and welded a single piece of pipe
thru the holes, cut the pipe section that is inside the A arm, then
machined the hole to accept 1960 300 or NY bushings...they are readily
available and at 1.13 in size, I think they are a better bushing than the
small 0.94 bushing...The control arm is thick enough to be able to do the
modification, the bigger bushing should last longer.

If you cannot find the correct 1958 size bushing, this modification may be
your only option...

I took some pictures of the modification we did, if you are interested, let
me know and I will dig them out...

Jean-Yves Chouinard.

From: Chrysler300@xxxxxxxxxxxxxxx<mailto:Chrysler300%40yahoogroups.com> <mailto:Chrysler300%40yahoogroups.com>
[mailto:Chrysler300@xxxxxxxxxxxxxxx<mailto:Chrysler300%40yahoogroups.com> <mailto:Chrysler300%40yahoogroups.com> ]
On
Behalf Of Larry Jabin
Sent: September-16-12 11:18 AM
To: Chrysler300@xxxxxxxxxxxxxxx<mailto:Chrysler300%40yahoogroups.com> <mailto:Chrysler300%40yahoogroups.com>
Subject: [Chrysler300] 1958 Chrysler 300D Upper Control Arm
Bushings?????????????

I cannot seem to find the correct size Upper control arm bushings anywhere

The OD of the bushings I removed are 1.030

All the parts suppliers ( Napa, ESPO) show a bushing that has OD of .94 when
the look it up for a 1958 Chrysler 300 or NYR

Has anybody had the same issue & if so where you able to find the correct
size bushings?

Thanks

Larry Jabin

P.W. Bellingall, Inc.
500 Sansome Street
Suite 501
San Francisco CA 94111

Tel: 415-781-8640
Fax: 415-781-0155

Larry@xxxxxxxxxx<mailto:Larry%40pwbsfo.com> <mailto:Larry%40pwbsfo.com> <mailto:Larry%40pwbsfo.com>
<mailto:Larry@xxxxxxxxxx<mailto:Larry%40pwbsfo.com> <mailto:Larry%40pwbsfo.com>
<mailto:Larry%40pwbsfo.com> >

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx<mailto:Chrysler300%40yahoogroups.com> <mailto:Chrysler300%40yahoogroups.com>

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx<mailto:bob%40simplexco.com>
<mailto:bob%40simplexco.com> or go to
http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave
Group" button

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups
Links

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.