Re: [Chrysler300] Wheel covers (hubcaps)

[Keith Boonstra <kboonstra@xxxxxxxxxxxx>]

Can't recall where I recently read this trick, but it sounds like it might work:

Pull off the wheelcover and dab a little glob of paint on the rim on each of the scratches where the grippers have slipped and left their mark.  Then put the wheelcover back on the wheel while the paint is still wet.  When it dries the paint will hold the wheelcover on.  Be sure to repaint the scratches every time you remove the cover.

I have not needed to try it, but it seems like an easy little thing to do.  And it's just crazy enough that it might get the job done.

Keith Boonstra

-

On Fri, Nov 8, 2013 at 3:58 PM, Donald Nissen <fast-ace@xxxxxxxxxxx> wrote:

 

Anybody have a good fix for hubcaps that like to come off at inconvenient times-like when driving? I have had the problem several times now, and in all cases they were fully installed and not at all loose before the trip. Luckely I heard them depart & was able to get them back, but I can't rely on luck forever. Any ideas?

Don Nissen  300K cvt

__._,_.___

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___