Re: [Chrysler300] C-300 & B wheels

A suggestion, If your going wrong, go all the way wrong. I put a set of #2243 Chrysler alloy rims from a 2004 300 Chrysler on my C-Body. They are 17" diameter 5 x 4 1/2 and with a nice set of radial tires (225x60x17) look's just Great to my eye. I also converted my car to Disc brakes front and rear, using all chrysler parts. Just a suggestion.

Best Regards,
Stephen A. Noia
1-408-210-4736 cell

From: John Nowosacki <jsnowosacki@xxxxxxxxx>
To: Anna F Noia <sa-noia@xxxxxxxxxxx>
Cc: Charles Schoendorf <cschoend@xxxxxxxxxxxxx>; "Chrysler300@xxxxxxxxxxxxxxx" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, January 27, 2014 3:20 PM
Subject: Re: [Chrysler300] C-300 & B wheels

I've lost count of how many early 15" rims I probably let go over the years. Now I'm having a heck of a time finding any. I was thinking of going to 15" on my 57C, as the tires just don't seem to look 'right' as little 14's. I know I'd have to change hubcaps. Maybe a pair of road wheels similar to what is on my Hurst (just not gold painted or pin striped).

On Mon, Jan 27, 2014 at 11:49 AM, Anna F Noia <sa-noia@xxxxxxxxxxx> wrote:

The Bolt diameter of 4 1/2 inches is not the only variable on the rims for your use. If all you want is to bolt up to your hubs, then OK. The 300 rim was a sturdier wheel, heavier gauge steel than the standard Saratoga and Windsor. They may also be slightly wider. The New Yorker had the same 5 x 4 1/2 inch

bolt pattern, and may also be of a heavier gauge steel. The early Imperial's had the 5 x 5 1/2 inch bolt pattern. Good luck.

Best Regards,Stephen A. Noia1-408-210-4736 cell

From: Charles Schoendorf <cschoend@xxxxxxxxxxxxx>
To: Chrysler300@xxxxxxxxxxxxxxx
Sent: Sunday, January 26, 2014 4:41 PM
Subject: [Chrysler300] C-300 & B wheels

I'm looking to purchase up to five steel rims for a C-300 or 300B. I believe the rims were the same. Specs are 15" diameter with 4 1/2" bolt pattern diameter. Prior to '55 I believe that Saratogas and Windsors also had a 4 1/2" bolt pattern, which would work. NY's and Imp's I believe were 5 1/2" diameter, ruling them out.

Many thanks.

Chuck, C-300 & a B