Re: [Chrysler300] 300D Wheel Covers on Ebay
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300D Wheel Covers on Ebay





The C wheel covers were manufactured in 2 ways, spinners integrally cast and spinners bolted on the hub. Sorry, I haven’t paid attention to the D scenario of wheel cover manufacturing.  300’ly, Rob Kern
 
Sent: Monday, April 14, 2014 10:45 PM
Subject: Re: [Chrysler300] 300D Wheel Covers on Ebay
 
 

 
Because I have a C and not a D, I don't know the answer to this one. I note that on the Ebay wheel cover set the "spinners" are cast right on, and therefore integral with, the hub of the wheel cover. On the C covers they are cast separately from the hub and held onto the hub with screws. Is the single-piece casting standard issue on all '58 Ds?
 
Keith Boonstra


__._,_.___


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.