Re: [Chrysler300] 56 300B
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 56 300B





I don't have your hood springs, but my E could use some as well. Same problem. I think these were considered as a club project at one time. Not sure if is in process?

On Mon, Dec 8, 2014 at 11:56 AM, 'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

Hi George...I do not have that NAPA info, but have had them made new for
various cars, by local automotive hydraulic hose group....see local listings
on hydraulic hoses. One typical special was putting Toyota 4wd 80's PS box
in 57 Ford pickup, using Ford pump (metric to SAE).

I would be wary on NOS on this...too old. I got into an accident one time
going very fast around a corner in a 65 NYer Town and Country, white one
with blue leather in it ; MOPAR high pressure hose burst sending me into
the woods in about a 1/4 second. Was a nice wagon..Emphasis : = was. Old
"correct" hydraulic hoses are verboten to me.

While on site need a few things, maybe someone can help .
1)300 c, other mopar convert fit; The little circular lights in back seat,
the chrome ring and lens or just the lenses ; need 4
2)stronger hood springs for 300C, were D or E stronger? These simply cannot
be right , hood falls ? Was this a known problem? 300 hood obviously heavier
than Ny'er
3)the large spring in upper part of hood latch that makes the hood jump up ;
totally missing on my car, or complete upper part of hood latch..
4) the small spring in lower hood latch

57 Dodge; the letters DODGE for trunk, in reasonable shape, especially one D
and the SS stone guards forward of back wheels.

Thanks for reading this,..and for helping.

John Grady

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of George McKovich george@xxxxxxxxxxxx [Chrysler300]
Sent: Thursday, December 04, 2014 5:54 PM
To: Intl 300
Subject: [Chrysler300] 56 300B

Help?? I need the NAPA part numbers for the high pressure and return power
steering hoses for 300B.

Also, does anyone have a spare trunk latch that goes in the trunk lid for
the same car??

Thanks
George

------------------------------------
Posted by: George McKovich <george@xxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to
https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links




__._,_.___

Posted by: Lindsey Fuller <lindsey@xxxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.