[Chrysler300] Bleeding brakes on the 59 300E ...............................

["dan300f@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi all:

 

I like many of the suggestions offered by members.  I have a device that you attach to the bleeder plug and it provides a vacuum as you work the handle.  Brake fluid is caught in a small bottle which comes with the kit.  No need for a second person to operate the pedal.  Just hook up the vacuum and pump.  When the clear hose runs without bubbles tighten the bleeder and go to the next wheel.  But make sure the reservoir does not run dry!  The order of bleeding is the same as recommended, i.e., RR, LR, RF, LF.  The device is called Mityvac.  The model number is MV8020 Brake Bleeding Kit.  I believe I purchased it at one of the local auto parts stores.

 

I use this method on all my cars and have never had a problem with excess pedal travel.

 

Dan Reitz

Bell Canyon, CA

 

__._,_.___

---

Posted by: DAN300F@xxxxxxx

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___