Re: [Chrysler300] 300C Brakes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300C Brakes

You might also check the short hose from the master cylinder also.  I had one of those collapse internally on my 57 Desoto and caused the same symptoms. 
Sent: Wednesday, September 30, 2015 2:06 PM
Subject: Re: [Chrysler300] 300C Brakes

Which brakes are dragging?
You might want to replace the rubber hoses from the front brakes to the frame.
They can deteriorate inside and end up with a flap of rubber hanging down inside the hose and acting like a valve.
Pressure to the brake pushes it out of the way and with no pressure, the flap falls down into the hose and prevents the fluid from returning to the MC.
On Wed, Sep 30, 2015 at 2:06 PM, Oddvin Skråmestø oddvin@xxxxxxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
I have replaced the mastercylinder, and serviced the wheelcylinders on my 300C. And I have adjusted the brakes according to the sevice manual.
It seems like there are still pressure present in the system after the brakes are released. The brakes are dragging.
I forgot to check the free play between the push rod, and mastercylinder. I hope the pedal free play adjustment will do the trick. Otherwise I’m out of good ideas.
I will try this on friday night, and I’m hoping to use the car on saturday at the end of season cruisin’.
Any ideas?
300C in Norway

Ray Jones. Y'all come on down an see us. Ya hear?


Posted by: "Lynn" <lynnd@xxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap