Re: [Chrysler300] 300 F axle ratios.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300 F axle ratios.





You surprised me on that one, Gary! Drag racing with a 3.31 RAR?!! That would seem to me to uncompetitively long gear ratio, unless you weren't really serious. I don't recall anyone, even in the NHRA stock classes back in the 60s and early 70s, running anything taller than 3.90. Most were running 4.11s or 4.56s, some 5.12. My daily driver/weekend SuperStocker had a 4.56.
 
I drive to the strip these days also, 4.11 gears.

Mike Reed in Hastings, Michigan
----- Original Message -----
Sent: Wednesday, September 30, 2015 3:09 PM
Subject: Re: [Chrysler300] 300 F axle ratios.

 When I was drag racing my Dodge at Lyons Drag Strip in 1960,  I went from 2.93 to 3.31.  at that time The dealer had no listing for a 3.18 when I bought my gears.   Gary Barker


__._,_.___

Posted by: "Michael Reed" <rmreed@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.