Re: [Chrysler300] 300 F axle ratios.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300 F axle ratios.





Good Morning,
My research for Macungie came up with 4 F axle ratios - 2.93; 3.15; 3.54, and 3.73 - on addition to the most common 3.31. 
Noel Hastalis 

Sent from my iPhone

On Sep 30, 2015, at 6:10 AM, "John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

JY and i got into pumpkin on F convert we are doing , it has 3.18 ratio ? I believe they were factory 3:31 ? I know earlier 300's had many optional ratios , but not sure of F ?
We are awaiting data plate decode from Gil , have not heard from him in a while . Hope all is ok with him down there ?
In the interim -- Anyone know about axle ratio options ? 3:18 seems too close to 3:31 to be worth doing ? A replacement ?
Also sure grip was stand alone option ?

Sent from my iPhone



__._,_.___

Posted by: Noel Hastalis <cpaviper@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap