Re: [Chrysler300] Chrysler 300H idle speed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Chrysler 300H idle speed





Michael,
A "hunting" condition at any idle speed can be caused by a defect in the centrifugal spark advance mechanism in the distributor, usually a weak (stretched)  or broken spring.  Don't overlook that as a possibility after checking more obvious things that are easier to get to.
---------Marshall Goodknight


---------- Original Message ----------
From: "Michael Moore mmoore8425@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: Ron Waters <ronbo97@xxxxxxxxxxx>
Cc: chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Chrysler 300H idle speed
Date: Sat, 24 Oct 2015 10:04:51 -0700

 

Yes, it idles especially rough the lower it goes. It also seems to “hunt� between 500 and 600.

 I discovered a couple of vacuum leaks yesterday and thought I had fixed them by removing the base gaskets from the carburetors, cleaning them, and forming a very small (cross section-like a pencil lid) of form-a -gasket  on all 8  surface and reassembled them. It’s hard to believe I still have a vacuum leak but certainly possible. There was also an old smog kit tap into the intake manifold I resealed.
Thanks, MIke Moore 300H
 

On Oct 24, 2015, at 9:41 AM, 'Ron Waters' ronbo97@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Not sure what you mean by 'marginal'. Does the car run rough and act like it's gonna stall ? If so, I would attach a vacuum gauge to the intake and see what's going on. Problem is either a vacuum leak, or something is out of whack in your carbs. It's not Ethanol gas.
 
Ron
----- Original Message -----
Sent: Saturday, October 24, 2015 12:30 PM
Subject: [Chrysler300] Chrysler 300H idle speed
 
What idle speed are the 300H folks setting? Although my manual says 650, it sure is marginal at that speed. 800 feels better, but I don’t understand what causes the difference. Ethanol?  
 
Thanks, 
Mike Moore
300H
 
 
 
 

On Oct 24, 2015, at 7:49 AM, Robert Augliera raugliera@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 
 
Does anyone have tips on replacing a windshield on a 61 Chrysler. Lots of chrome to remove.
Thanks
Rob
 

 
 

 



__._,_.___

Posted by: "mgoodknight@xxxxxxxx" <mgoodknight@xxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


____________________________________________________________
Heavy rains mean flooding
https://ad.doubleclick.net/ddm/clk/296043998;123050234;f


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.