[Chrysler300] Looking for a set of plug wire shields -
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Looking for a set of plug wire shields -





Hello Group -
With the 18,000+ miles I've cruised in my F these past 2 summers, I've managed to fry three spark plug wire ends. Two of these plug wires burned all the way through, and were just hanging, away from the spark plug. (Once last year, and once again this year.) 
 
My wedge motor is missing the bolt-on spark plug wire shields that fit in between the exhaust manifold and the plug wires for the #3/5 and #4/6 cylinders. Before I install another new set of plug wires I picked up from Lectric Limited recently, I need to install these shields, which have not been on the car since I purchased it. Do any of you have a set I can purchase?
 
Thanks and Merry Christmas!
 
Noel Hastalis
F coupe
Burr Ridge, IL 
 
 
 


__._,_.___

Posted by: cpaviper@xxxxxxxxxxx


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.