Re: [Chrysler300] Looking for a set of plug wire shields -

["dverity@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi Noel,

These are reproduced and sold by a number of vendors. You can see pictures here http://www.hoffmanswinnerscircle.com/08_electrical.htm Part number PWS03..

Don

 

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Monday, December 21, 2015 9:27 PM

To: Chrysler300

Subject: [Chrysler300] Looking for a set of plug wire shields -

 

 

Hello Group -

With the 18,000+ miles I've cruised in my F these past 2 summers, I've managed to fry three spark plug wire ends. Two of these plug wires burned all the way through, and were just hanging, away from the spark plug. (Once last year, and once again this year.)

 

My wedge motor is missing the bolt-on spark plug wire shields that fit in between the exhaust manifold and the plug wires for the #3/5 and #4/6 cylinders. Before I install another new set of plug wires I picked up from Lectric Limited recently, I need to install these shields, which have not been on the car since I purchased it. Do any of you have a set I can purchase?

 

Thanks and Merry Christmas!

 

Noel Hastalis

F coupe

Burr Ridge, IL

 

 

 

__._,_.___

---

Posted by: <dverity@xxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___