Re: [Chrysler300] Freeze plug

["Anna F Noia sa-noia@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Ray

Where do you buy "Marine" Brass plugs? are they the same heat ratings as automotive plugs? Interesting, just curious.

Best Regards,
Stephen A. Noia
1-408-210-4736 cell

On Monday, January 11, 2016 12:54 PM, "Ray Jones 1970hurst@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

I have a tool with a ball joint and screw on plug drivers in various sizes.

You do not have to be square to the plug to drive it in.

I also use Marine Brass plugs. They will not rust, which is what makes the old plugs fail.

Ray in chilly Mena

On Mon, Jan 11, 2016 at 9:54 AM, 'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Went through this too...stock ones can be a problem ,---My .02, OK if done
outside car by a real , experienced pro, but might be hard in place in a
car, do not know specific answer , depends a bit on specific plug, but Hot
Heads makes a T shaped thing for replacing bang in core plugs that works
like a molly bolt --no hitting with hammer, which would be the problem in
the car. Even if you tried to do that, ? always ---was it really hit right.
It overheats SO fast if a plug pops, can damage engine in minutes, as water
drops fully out of heads. I would go with Hot Heads core plug, gasket and
nut you just tighten. . .

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Gary Gettleman gary.gettleman@xxxxxxxxx [Chrysler300]
Sent: Monday, January 11, 2016 1:30 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Freeze plug

To All, Have the C in the shop and while they were testing driving lost a
freeze plug. Told it is on drivers side and steering box/starter are in the
way. Is it necessary to pull the engine??

As Always Thanks for the Great Support.

gary gettleman

Sent from my iPad

------------------------------------
Posted by: Gary Gettleman <gary.gettleman@xxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to
https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

--

Ray Jones. Y'all come on down an see us. Ya hear?

__._,_.___

---

Posted by: Anna F Noia <sa-noia@xxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___