Re: [Chrysler300] 1962/63/64 Power Rear Antenna Talk
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1962/63/64 Power Rear Antenna Talk





"Wooden Shoes and Iron Brutes"

"Iron Brutes and Wooden Shoes"

On Sat, Jan 23, 2016 at 1:54 AM, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

I spent about ten minutes at John Holst’s most excellent website http://www.jholst.net/62-parts-manual/accessories.pdf  as I was curious to see if the parts manuals were clear on these parts.   Section 1-88-6 shows the power antenna mounting system includes two adapters-upper and lower, above and below the sheet metal.  The adapters are different for the ’62, ’63 and ’64.  Everything else looks the same so a set of ’62 adapters/bezels is all you need.  If anyone scrapped out a ’62 power antenna but kept the carcass, the adapters would make an easy sale to Matt. But it takes both—and the gasket.

 

While on the subject, I have a spare but non-functioning power antenna system for a ’64 Chrysler.  I’m trying to get to the bearings of the reversible motor which seem to be frozen.  I’ve got the antenna base loose from the motor but am stuck on digging into the sealed motor.  Anyone been deeper into one of these on a DIY basis?  I’m hoping that a little persuasion on and lubrication of the shaft bearings will return the system to functionality.  The lower adapter/bezel is pot metal and designed to only go together the correct way.

 

Also, the switch for this system was a challenge to get to and was also frozen.  Persuasion and lubrication returned it to functionality.

 

Good luck with your quest.

 

Rich Barber

Brentwood, CA

 

 

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Matt Allyn allynentertainment@xxxxxxxxx [Chrysler300]
Sent: Friday, January 22, 2016 11:04 AM
To: yahoogroups <chrysler300@xxxxxxxxxxxxxxx>
Subject: [Chrysler300] 1962 Power Rear Antenna Talk

 

 

Anyone know if a Rear Power Antenna out of a 1963 300 will bolt onto the 1962 300 rear fender?

Or....is the Chrome Bezel attachment too different per the angle of the fender?

And....would anyone have a rear power antenna OR just the bezels for a 1962 300?

 

Thanks! 

Matt Allyn




__._,_.___

Posted by: Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap