Re: [Chrysler300] 62 Power steering pump bracket
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 62 Power steering pump bracket

Larry, Thanks!
I am going to do the same thing, but I will order one or two from Gary.
Do you cut the hose to be flat and unroll it to be the thickness? 
Mike Moore

On Feb 19, 2016, at 6:55 AM, Larry Jett <larrywjett@xxxxxxxxx> wrote:

For 30 years I have cut a 2 inch piece of heater hose and smooshed it down the crack in a dozen cars.

Larry Jett        For Lent, I decided to quit all my bad habits........but then remembered no one likes a quitter.



On Fri, Feb 19, 2016 at 6:18 AM, 'Bob Merritt' bob@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

yes, that is available from Gary Goers.
Part number 255.
$3.10/ea in catalog #10, may be higher now.
I know he had an increase, I don't know how much
so I over pay and he refunds, all is fair.
------ Original Message ------
From: "Michael Moore mmoore8425@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: "Mike Moore" <mmoore8425@xxxxxxx>
Cc: "Chrysler 300 List" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: 2/19/2016 8:53:02 AM
Subject: [Chrysler300] 62 Power steering pump bracket

There is a rubber bumper located between the two parts of this bracket.
Does anyone know if they are available and if so where?
Thanks you,
Mike Moore


Posted by: Michael Moore <mmoore8425@xxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap