Re: [Chrysler300]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300]





Hi Gary.. Thanks.. That is about the switch and rebuilding them , which is good stuff ! Been there ! 

You can see the vacuum nipples  etc but he does not get into what each one does .. If left undisturbed you never need to . I have seen a diagram long ago with hose  colors and "pin out" of the vacuum plug  side of it . 
And what each one does ..like fresh air open , fresh air close etc . 
It will turn up !! It is there for Ac , and not the more common heater only version . 
Thanks again,
John
Sent from my iPhone

On Feb 20, 2016, at 10:55 AM, GARY RUNKEL <moparfan@xxxxxxxxxx> wrote:

John,
It's under Tech Department, bullet point #17, which leads you here: https://www.youtube.com/watch?v=Lpl2pV5Eam8&feature=youtu.be

Gary


From: "John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: Chrysler300@xxxxxxxxxxxxxxx
Sent: Saturday, February 20, 2016 10:01:38 AM
Subject: [Chrysler300]

 

Anyone know where the info is on what each hose and actuator does on vacuum heater switch ? The nipples and colors ? Found it on Ac imperial but cannot find for non Ac 60 . Probably same 60-62 . Good info to have on site if some one finds it ? 




__._,_.___

Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap