Re: [Chrysler300]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300]





Bob that is a really good step , the pin out on back of the switch they show might be for Ac car as it has a compressor clutch terminal . I did not know till now that 300E had this vacuum operated push button heater . Is it the same as 60-62 ? Looks very close and that was in non unit body .i thought heater was new for 60 . 
All of this says 59 is the year , in some service supplement, it must exist ? 
But some Ac servos look the same as heater only . What they call recirculated door is fresh air on 60 I think 
Sent from my iPhone

On Feb 20, 2016, at 2:45 PM, 'Bob Merritt' bob@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 
I dug out my 1959 service manual
and made this page:
 
 
The 59 manual is the only place I've ever seen
any information on the vacuum tube color and routing.
If anyone has more, please send to bob@xxxxxxxxxxxxx
and I will use it.
 
 
 
 
------ Original Message ------
Sent: 2/20/2016 10:01:38 AM
Subject: [Chrysler300]
 
 

Anyone know where the info is on what each hose and actuator does on vacuum heater switch ? The nipples and colors ? Found it on Ac imperial but cannot find for non Ac 60 . Probably same 60-62 . Good info to have on site if some one finds it ? 



__._,_.___

Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap