Re: [Chrysler300] correct 300H ignition coi voltagel
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] correct 300H ignition coi voltagel

On 02/28/16 07:09, John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300] wrote:


> Barely enough at high rpm .. Why the two points in first place on
> letter cars . If set too loose high rpm miss coil undercharged. If too
> tight not clean break = high rpm miss . Coil tower must be spotless
> silicone grease under cup . Mopars are known for spark jumping under cup
> to primary terminals. Drove me crazy did not know that on 68 charger
> new car. Hi rpm miss.
> Hope this helps.

> Sent from my iPhone

Thats why some of us learned to look for spark leakage at night,
under a dark sky with no lights its easier to see the spark jumping
around if it is leaking. Either at the coil or anywhere along the wires.
Spark tends to look for the path of least resistance when seeking a
path to ground.

Paul Holmgren
If you could sum up all you felt about life and crystallize
it in one master insight, you would have said it all, and
you would be dead  -  Fritz Leiber  -

Posted by: paul <paulholm@xxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Yahoo Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo Groups is subject to:

Home Back to the Home of the Forward Look Network Archive Sitemap