Re: [Chrysler300] R12 Freon
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] R12 Freon

When you say converted to R134, what exactly did that entail? If you converted it to R134, the person converting should have replaced the seals when the system was drained and cleaned out of the R12. Or, did the conversion just mean that he drained the R12 out and refilled with R134 directly? Leaving the installation as it was with R12? I'm thinking that is what was done, just a refill of the new Freon. That being said, the new Freon may have damaged more than just the seals. I would check with a reputable shop and find out what really needs to be done to correct your situation. Changing back to R12, is now "Illegal" so a licensed shop should not do it. The other soft parts may also need replacement, not just the seals. Good luck in your investigation.  
Best Regards,
Stephen A. Noia
1-408-210-4736 cell

On Tuesday, March 8, 2016 2:37 PM, "Val Jeffers edward1108@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 Greetings Fellow 300 Owners,

                                 I had my G converted to R134 several years ago and found out over time it will deteriorate the seals. I have an NOS seal kit and am needing a good source of R12 freon.  Any suggestions are appreciated !


                                                                        &n! bsp;          Val Jeffers


Posted by: Anna F Noia <sa-noia@xxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap