Fwd: [Chrysler300] 300-F Anti-stall Dash Pot Vacuum
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fwd: [Chrysler300] 300-F Anti-stall Dash Pot Vacuum





Hi Allan and Gloria and Group

Because my junked 300F was under a blue (rotting PVC) cover and open hood for many years, the anti-stall dash pot unit has completely frozen like the water pump and the engine itself. The only cranking parts are the power steering pump (builds up pressure), the alternator (bearing noise) and the visco clutch fan.
Sooner or later I assume I need a replacement anti-stall dash pot unit.

Kind regards

Dieter


-------- Forwarded Message --------
Subject: [Chrysler300] 300-F Anti-stall Dash Pot Vacuum
Date: Fri, 11 Mar 2016 21:49:14 -0500
From: 'Allan' agmoon@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Reply-To: Allan <agmoon@xxxxxxxxx>
To: 300 Club Listserver <chrysler300@xxxxxxxxxxxxxxx>


 

Group,
 
We would very much like to hear what you other cross ram folks have working in your cars.
 
Does it normally take 20 inches to even begin to move that dash pot finger and even more to do the job that it is supposed to do (assuming it is adjusted correctly)?
 
Some engines don't even have that much vacuum???
 
Thanks for any experiences on this subject.
 
Allan & Gloria
 
 
 
 
 
 



Diese E-Mail wurde von einem virenfreien Gerät gesendet, geschützt von Avast.
www.avast.com


__._,_.___

Posted by: Dieter Isler 8496 <dieter8496@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap