Re: [Chrysler300] short ram heat block shim
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] short ram heat block shim

Rich and all,

I put 1” freeze plugs in my heat pipes to block off the flow to the bottom of the carbs. The only thing I did was drill a 1/4” hole in each plug for some of the heat to get thru. My “K” runs exceptionally well in New England climate. For what it’s worth, my 2 cents.

Don Cole
On Apr 29, 2016, at 9:59 PM, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Could I ask if there is a consensus on to block, not to block or partially block the manifold heat to the JK short rams when operating in a temperate climate?



Rich Barber

Brentwood, CA 



From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'Bob Merritt' bob@xxxxxxxxxxxxx[Chrysler300]
Sent: Friday, April 29, 2016 12:22 PM
To: Chrysler 300 List <Chrysler300@xxxxxxxxxxxxxxx>
Subject: [Chrysler300] short ram heat block shim




 This is for owners of Js and ram Ks.


I was making block off shims for the short

ram heat tubes. I used shim stock and scissors and

ended up with sharp edged pieces of junk.

Wondering why I do this when I know a guy in the stamping business I have nice professional block off shims

with accurate dimensions and clean soft edges.

I made extras in case anybody wants them:


Shims are $5/each with a $5/lot shipping charge.






Posted by: donald cole <mr300k@xxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap