Re: [Chrysler300] Stalling problem seems to be solved
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Stalling problem seems to be solved

Good.  Now we all know.  Thanks for the update.
*  300's with WCFB's used to do this all the time on certain sharp turns but the fix for this was in drilling a hole somewhere, if I remember right. 
----- Original Message -----
Sent: Monday, May 23, 2016 11:03 PM
Subject: RE: [Chrysler300] Stalling problem seems to be solved


Hello Again,

After talking with Jim McGowan from the Quad Shop who rebuilt my AFB, I adjusted the floats lower and this seems to have solved the stalling problem on right turns. I will keep my fingers crossed

Thanks again for all the suggestions and assistance.  I enjoyed all the conversations.


Mark Lindahl

?63 300 Conv.

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'Mark Lindahl' mplindahl@xxxxxxxxxxxxx [Chrysler300]
Sent: Friday, May 20, 2016 7:53 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Return to IL after Spring Meet



Thanks for those of you that offered advice on my recent stalling problem as well as the issue of contaminated brake fluid.  I was able to get a local shop in Holland to flush the brake fluid and the system now works well.

The stalling on right turns continues to be a mystery.  I will need to diagnose it in the upcoming weeks.  Have a great meet in Holland, MI.


Mark Lindahl

?63 300 Conv.


Posted by: "Allan" <agmoon@xxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap