|
Hi Josh,
Great project. I know of no one producing panels. 100 sets sounds like a
good target but, could be larger market? Will you plate with “bright dip” like
Chrysler did?
Please put me in for 2 sets.
Thanks,
Gary
Sent: Wednesday, June 01, 2016 10:17 AM
To: yahoogroups
Subject: [Chrysler300] Possible Reproduction for 1957
Chrysler's
Hello Everyone,
Recently I posted this question on
the Forward Look forum and had a good response to it. So now I am posing
it to the group that would probably have the best input and opinion on the
subject.
I am currently looking at
reproducing the aluminum panel found on the door panel, behind the door handle,
on the 1957 Chrysler 300 and New Yorker. First off, I want to make extra
sure that nobody is currently working on this project. If you or someone
you know is working on this, please let me know. ; Secondly, what do you
all feel the demand would be for these panels? Would 100 pairs seem like
enough or not enough? I have hopes of being able to tool and produce 100
pairs and sell them for around $175 a pair. If anyone has opinions or
information they would like to share on the subject, please let me know.
I greatly appreciate
everyone's help and cooperation on this project.
Thank you,
Josh Mishler
__._,_.___ Posted by: "Gary Nelson" <gnelson@xxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap