Re: [Chrysler300] Possible Reproduction for 1957 Chrysler's
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Possible Reproduction for 1957 Chrysler's

Gary, & All
I could also use panels, mine are definitely weathered but will use because I have too. Also, I have two '57 300's and may need two  sets. This assumes I actually do both, should start on #1, this summer (hopefully?) What is your time frame for these items? Good Luck, make sure you contact all of us with a time line when it's determined. Again, Thanks for you efforts.
Best Regards,
Stephen A. Noia
1-408-210-4736 cell

On Thursday, June 2, 2016 9:41 AM, "'Gary Nelson' gnelson@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Hi Josh,
Great project. I know of no one producing panels. 100 sets sounds like a good target but, could be larger market? Will you plate with “bright dip” like Chrysler did?
Please put me in for 2 sets.
Sent: Wednesday, June 01, 2016 10:17 AM
Subject: [Chrysler300] Possible Reproduction for 1957 Chrysler's
Hello Everyone,
Recently I posted this question on the Forward Look forum and had a good response to it.  So now I am posing it to the group that would probably have the best input and opinion on the subject. 
I am currently looking at reproducing the aluminum panel found on the door panel, behind the door handle, on the 1957 Chrysler 300 and New Yorker.  First off, I want to make extra sure that nobody is currently working on this project.  If you or someone you know is working on this, please let me know.  ; Secondly, what do you all feel the demand would be for these panels?  Would 100 pairs seem like enough or not enough?  I have hopes of being able to tool and produce 100 pairs and sell them for around $175 a pair.  If anyone has opinions or information they would like to share on the subject, please let me know.
I greatly appreciate everyone's help and cooperation on this project.
Thank you,
Josh Mishler


Posted by: Anna F Noia <sa-noia@xxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap