Re: [Chrysler300] Power Steering Pump leak
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Power Steering Pump leak

Charlie, I discovered the same thing. Did you torque to 45 ft-lbs? 
It sure seemed like an awful lot.I ended up with two of the belt tightening tools (like one twice as thick0. That seemed to me to be easier to work with (both on the same torque wrench.)
Mike Moore
On Jun 15, 2016, at 8:40 AM, Charlie V cv300g@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


The belt tightening tool does work. I also found that its easier if I remove the battery. 


Thanks all for the info, I think I'll order a pump just in case.I should
be able to handle removal/disassembly OK, and I'll also order one of
those belt tightening tools.

Don Nissen 300K


Posted by: Michael Moore <mmoore8425@xxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap