Re: [Chrysler300] 300K wiring diagram
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300K wiring diagram

Wiring diagram does not show the A/C., but looks like it has a firewall junction block.
This block is an area which can cause many problems and is where everyone needs to check.
Pull block connector apart and check for corrosion or poor connections
This may well be where your problem  is.
Make it part of your Spring maintenance to pull apart, clean very well and fill  with Die-electric grease when reassembling.
I always take needle nose pliers and give each spade terminal a 15° twist. this enures good contact when connected.
Most everything goes through this block from the front to the cabin and beyond, so it is  very important and often overlooked.
Whatever you are checking, it goes thru this block.

On Wed, Jun 22, 2016 at 12:28 PM, 'Bob Merritt' bob@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

John Holt's site is
He has the service manuals 1955-1965
and includes the wiring diagrams at
------ Original Message ------
To: "yahoogroups" <chrysler300@xxxxxxxxxxxxxxx>
Sent: 6/22/2016 1:12:37 PM
Subject: [Chrysler300] 300K wiring diagram

Good Afternoon,


Can anyone advise where to find the wiring diagram for a 300K online, if such exists?  Tracking a failure between A/C dash controls and the unit, it works when powered directly, but doesn’t spin when connected to dash lead.  Worked one day, not the next.  Thanks-


Hugh Baldus


Ray Jones. Y'all come on down an see us. Ya hear?


Posted by: Ray Jones <1970hurst@xxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap