Re: [Chrysler300] Need help: 300C starter button fail
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Need help: 300C starter button fail

Agree w John .. Jump vacuum switch and try and jump neutral switch to ground and try . Vacuum switch is a little dicey on these cars. Have also seen wiring mixed up at start relay to vacuum switch but itvwas working right? 

Sent from my iPhone

On Aug 3, 2016, at 11:33 PM, 'John L. Chesnutt' chesnutt@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Hi Jeff,

You need to first check:

 1.  The Neutral Switch located on the outside of the transmission.

2.  Vacuum Switch  on the intake manifold


I don’t think your starter button switch is the problem.


John – Portland, OR - Owned our 300C for 58 years.


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of ldmiklas@xxxxxxxxxxx [Chrysler300]
Sent: Wednesday, August 03, 2016 7:34 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Need help: 300C starter button fail


Hi all


The starter button/neutral button in my C fails to engage the starter. Jumping the relay starts the car fine, so I

can only assume the button is the problem.


Is my next step to pull the shift button assembly or is there a simpler attack ?  Any insight greatly appreciated !!


Thanks !


Jeff Miklas  -  ldmiklas@xxxxxxxxxxx


Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap