[Chrysler300] 300 G Grille Emblem

["dan300f@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi all:

 

Years ago,  decided to replace the grill emblem of my F with a new one.  It seems like it took 2 men and a boy to remove the old one.  So I decided on a method to install the new one so that I could remove it easily if need be.  I took a piece of sheet metal, cut it to the shape of the emblem and pounded it to the spherical shape of the back side of the emblem.  Next, I drilled two holes in the grill where the emblem would be mounted.  I soldered two small bolts, with the heads ground down to almost nothing, so that the position of the bolts matched the ones I drilled in the grill.  I then used JB Weld to mount the emblem to the metal I had fashioned.  After the JB Weld had cured, I mounted the assembly to the grill.  It's been there now for perhaps 15 years.  The JB Weld has not damaged the backing of the emblem.

 

Dan Reitz

Bell Canyon, CA

__._,_.___

---

Posted by: DAN300F@xxxxxxx

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___