[Chrysler300] manifold heat riser on 61G question(s)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] manifold heat riser on 61G question(s)

So, my heat risers are nice and free, the bushings seem to be fine and not rattling around in the manifold, and even the little nut and bolt to hold the counterweight to the shaft is not rusted solid, so it is removable.  Problem is the bimetallic springs are crumbling. Is there a cross reference to something newer than 61 that I can get at an auto parts store to just replace the spring?  Do I have to buy an entire heat riser rebuild kit (if there is such a thing)?
Do I just wire it open by closing it first by hand with the counter  weight and then rotating it 90 degrees?
I'm sure I'm not the first to ask these questions.  Any help appreciated.

"A government big enough to give you everything you want, is big enough to take away everything you have." ... Thomas Jefferson
Conservatives believe government action is an obstacle to our freedom. Leftists believe our freedom is an obstacle to government action. 


Posted by: John Nowosacki <jsnowosacki@xxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap