RE: [Chrysler300] Honorable Mention for 300 Club Members in this article
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Honorable Mention for 300 Club Members in this article



But axle did not shear off, right? That is a typical wheel bearing failure…if you keep going, which is easy to do, races spin tearing all up. . Other nuances abound about center shims, thrust block, side play on Timkens.---- long thread a few years back on that. Assembled wrong by others on newly acquired 300F. . Bit me. But again, axle was still OK. Fixed idiocy, was ok after. After 2500 in travel and tow / ship Chicago to Boston. =OK    -2500. And two days. 

 

From: ripinator@xxxxxxxxxxx [mailto:ripinator@xxxxxxxxxxx] 
Sent: Thursday, January 12, 2017 12:07 PM
To: dverity@xxxxxxxxxxx; 'Don Warnaar'; m.hopkins@xxxxxxx; John Grady
Cc: Chrysler300@xxxxxxxxxxxxxxx
Subject: RE: [Chrysler300] Honorable Mention for 300 Club Members in this article

 

I had rear wheel bearing go bad and it tore up the area around the axel tube and the axel too. Had to replace the entire diff, as it was too damaged to support the new bearing. It's a 66 300.

Sent from my android device.

-----Original Message-----
From: "'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: dverity@xxxxxxxxxxx, 'Don Warnaar' <300country@xxxxxxx>, m.hopkins@xxxxxxx
Cc: Chrysler300@xxxxxxxxxxxxxxx
Sent: Thu, 12 Jan 2017 11:29 AM
Subject: RE: [Chrysler300] Honorable Mention for 300 Club Members in this article

  

Exactly why I wanted to find out what happened, in a forensic sense ..I agree 100% with you Don..never ever heard of that , that area very beefy. At first thought maybe drum backed itself off. But apparently had to replace the axle; need to know if in fact it “snapped” and where. 

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of dverity@xxxxxxxxxxx [Chrysler300]
Sent: Thursday, January 12, 2017 9:09 AM
To: John Grady; 'Don Warnaar'; m.hopkins@xxxxxxx
Cc: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Honorable Mention for 300 Club Members in this article

 







I’ve never heard of an axle snapping on any Chrysler with the tapered axle setup, especially just cruising down the highway. I’ll bet there is more to this than is being reported. 

Don

 

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx 

Sent: Wednesday, January 11, 2017 6:12 PM

To: 'Don Warnaar' <mailto:300country@xxxxxxx>  ; m.hopkins@xxxxxxx 

Cc: Chrysler300@xxxxxxxxxxxxxxx 

Subject: RE: [Chrysler300] Honorable Mention for 300 Club Members in this article

 

  

Second that!!! 

“Snapped” axle? Why? Anyone know? Where snapped? Looks like at wheel bearing? Might be important info..obviously is….

John

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Don Warnaar 300country@xxxxxxx [Chrysler300]
Sent: Wednesday, January 11, 2017 5:43 PM
To: m.hopkins@xxxxxxx
Cc: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Honorable Mention for 300 Club Members in this article








Looks like Club Members Noel Hastalis and Don Verity came through again, and did it in a very quick and efficient manner when timing was of the essence.  Congratulations to Don and Noel, two true 300 nuts.

Another example of the helpfulness of the members of dear old Club.

Don Warnaar

----- Original Message ----- 

From: mailto:m.hopkins@xxxxxxx%20[Chrysler300] 

To: cbilter@xxxxxxxxx 

Cc: John Holst <mailto:jholst@xxxxxxxxx>  ; Chrysler300 <mailto:chrysler300@xxxxxxxxxxxxxxx>  ; mailto:mmoore8425@xxxxxxx%20[Chrysler300] ; 2HsandaHeritage@xxxxxxxxxxx 

Sent: Wednesday, January 11, 2017 5:19 PM

Subject: [Chrysler300] Honorable Mention for 300 Club Members in this article

  

https://news.classiccars.com/bumps-bruises-teamwork-deliver-drive-home-ii/ 


















[Non-text portions of this message have been removed]



------------------------------------
Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap