I use a long barreled needle scalar, with the gun in my right hand and the needles squeezed together and held in my gloved left hand. Using an oblique angle with short bursts of air the stuff flew off in about 20 minutes, with no damage to the light gauge metal. I then used a HF small grinder with a SST wire wheel to dress up the surface, amazingly fast, with a quick wipe of presol ready for primer. Used this same procedure on both my J and L easy and fast.
Posted by: Jamie Hyde <Jamie.Hyde@xxxxxxxxxxxxx>
To send a message to this group, send an email to:
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang