[Chrysler300] Mystery engine mount....
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Mystery engine mount....

Anyone out there good at solving mysteries??

I have what appears to be a rear engine support/mount, similar to the ones used on our 300’s.

The parts tag number is 2225-748 but does not appear in any of my parts books or supersedence cross reference books

It was still available in the 1979 master price list  but went NS1 in 1980

Definitely a MoPar part as the CDDP logo is molded into one end along w/the number 17

Those are the only markings on the mount

I  have 2 of them, both NOS

If anyone has an interest in helping me ID these, I sure would appreciate it

Can supply pic’s  and mesurements.

It’s a solid rubber mount sandwiched between 2 metal plates.

Both plates have 2 threaded studs protruding on each side.

They are spaced apart different on each side



Dave Schwandt



Posted by: "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.