RE: [Chrysler300] Another edition of the ENews
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Another edition of the ENews

The 413 that was in the 300 J that Herb Rogers bought from me years ago also had a blank tag engine installed.



From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of charlies@xxxxxxxxxxxx [Chrysler300]
Sent: Wednesday, March 29, 2017 9:14 AM
To: Jean-Yves Chouinard
Cc: Chrysler 300 List; Bob Merritt
Subject: Re: [Chrysler300] Another edition of the ENews


I purchased a 413 engine out of a gutted 1962 300H drop top many years ago and it had the same tag on it - would have been a warranty block. The engine ID pad had no stampings on it.

Charlie in Ottawa



On 2017-03-28 17:16, Jean-Yves Chouinard jymopar@xxxxxxxxxxx [Chrysler300] wrote:



Regarding the picture of an engine tag in the E news, I think it's a warranty block tag.

I had a 60 Dodge Polara coupe at one point and it had a replacement engine that was changed when the car was still under warranty. The engine had a tag on it, held in place on the block just like this red tag with a small round nail/rivet...the block ID pad was blank on that warranty block, but this tag identified the engine. Mine was a 361 (Canadian built Polaras had Matador engines) and the code stamped on the tag was 0134.

The engine block codes are listed in section 9-01-24 of the 1960 Chrysler parts book.  The code 0133 stamped  on the E-news block tag is not listed in the 1960 Chrysler I don't know what engine it is for...later or earlier engine????

Thank you Bob for the great job you do on the E news! I like it!




From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of 'Bob Merritt' bob@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: March 28, 2017 5:28 PM
To: Chrysler 300 List
Subject: [Chrysler300] Another edition of the ENews 




Another edition of the ENews

has found its way to the electronic ether.




to see what is new.





[Non-text portions of this message have been removed]

Posted by: "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Yahoo Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo Groups is subject to:

Home Back to the Home of the Forward Look Network Archive Sitemap