Re: [Chrysler300] complete new driveshaft
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] complete new driveshaft

Exactly right. Gets very old fighting vibration all the time or pretending it is not too bad. To me that is even worse. It is a bad design . Can lube  it with original grease from old one 

Maybe we need a list of common sense things that are ok to do with no points off. I am running out of original battery acid. 
As an aside lately messages come without ID  of who sent them . Recognize Don Cole from burning tires. It says from Bob at simplex co ( thank you Bob) so need to sign name or it used to say name? Not my thing , whybthis is or changed. And grateful for what we have ., John Grady 
Sent from my iPhone

On Apr 8, 2017, at 7:26 AM, donald cole mr300k@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Bob and club,

I have this on my K. It works great! I blame Don Verity for making my transmission shift so hard that I kept ripping out u-joints. Mine was made about 20 years ago but just installed after the Holland meet.

My vibration went away and it still breaks tire going into second with no problems.

As far as point deduction why have it look right if you can’t drive the car like you want!?

Just my 300 cents.

On Apr 3, 2017, at 12:06 PM, 'Bob Jasinski' rpjasin@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

I must say, this is tempting (scroll down to middle of page).


and I wouldn't have to modify my original. But then there's those point deductions...hmmm.  


Bob J



Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap