Re[2]: [Chrysler300] 61 G Heater Core
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re[2]: [Chrysler300] 61 G Heater Core





 
Hello Val;
 
I send the old valve out for rebuild so I haven't
paid attention to the part number.
 
I use Joe Hudacek, 6606 Banks Ave, Superior WI 54880-5721 (715) 392-6169. www.heatervalves.net 
 
By the way, there is a web page on heater valve replacement by Carl Bilter,
see
http://www.chrysler300club.com/how/hvalve/hv.html
 
 
 
 
------ Original Message ------
From: "Val Jeffers edward1108@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: "Lindsey Fuller" <lindsey@xxxxxxxxxxxxxxx>; "Ray Melton" <rfmelton@xxxxxxx>
Cc: "Chrysler 300 Club, Int'l" <chrysler300@xxxxxxxxxxxxxxx>
Sent: 4/9/2017 8:56:15 PM
Subject: Re: [Chrysler300] 61 G Heater Core
 
 

By the way, what is the part number for the heater control valve. I would have to think it would fit several years. 

                         Thanks,

                         Val J


Sent from Yahoo Mail for iPhone

On Sunday, April 9, 2017, 4:36 PM, Lindsey Fuller lindsey@xxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

My previous post, I was thinking of the heater control valve. Had one leak many years ago right on passenger side carpet. Access was by removing glove box. Don't believe had to come from the engine bay side. 

On Sun, Apr 9, 2017 at 3:21 PM, Ray Melton rfmelton@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

Hello Val -

Your water leak might not be the heater core; just two weeks ago the heater control valve failed and leaked on the passenger side footwell carpet of my '57 300C.  The heater box will likely have to be removed to get to either the valve or the heater core, so it's a good opportunity to check BOTH potential sources of water leakage.  The heater valve repair is quick and relatively painless ($85 - see my posts from just last week about where to send it), whereas I bet the heater core removal and repair will end up costing quadruple that!  A good radiator shop should be able to repair the heater core (if it's not too eaten up with corrosion); after all, it is indeed just a miniature radiator!  Good time to replace all the hoses and clamps, too.

Ray Melton


On 4/9/2017 12:50 PM, Val Jeffers edward1108@xxxxxxxxx [Chrysler300] wrote:
 
  Greetings all,
                       I am sure mine is leaking as I feel wetness on the front passenger carpet. Where might a new one be found or can it possibly be repaired ? I assume you remove the heater box on the firewall for access ? Appreciate any help !


                                                                                     Thanks,

                                                                                     Val Jeffers




__._,_.___

Posted by: "Bob Merritt" <bob@xxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.