Re: [Chrysler300] 1964 300 K convert gas tank cap

["'Fern Rivard' crc@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

I have an nos (new in the box) vented locking gas cap by Stant marked G-92A for $100 USD  including shipping.

I’ve used the same cap in both my 1962 300H and my 1965 300L.

Fern

 

 

 

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Wednesday, August 01, 2018 4:54 PM

To: 'Harry Torgeson' ; 'Chrysler 300 List'

Subject: RE: [Chrysler300] 1964 300 K convert gas tank cap

 

 

Harry:

Be sure to get a “Vented” cap and one that has good “anti-splashout” capability as the tank filler sits so low.  Mine has this stamped into the steel:  “VENTED  ANTI-SURGE”.  No brand name and it fits a little loose so may not be the best one for the car and probably allows a little fuel loss when full and digging out.  Check it out at the store before you pay for it—if they trust you.

Rich Barber

Brentwood, CA (98.6F at 4PM—outside temperature, not me)

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of Harry Torgeson torg66@xxxxxxxxx [Chrysler300]
Sent: Wednesday, August 01, 2018 3:01 PM
To: Chrysler 300 List <Chrysler300@xxxxxxxxxxxxxxx>
Subject: [Chrysler300] 1964 300 K convert gas tank cap

 

I need a new one, mine was made in Mexico, does the group know of a decent one I could buy.

Thanks Harry

__._,_.___

---

Posted by: "Fern Rivard" <crc@xxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___