Re: [Chrysler300] 300G Heater Hose Routing

["'Michael Ashmore' michael.ashmore@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

And my "G" was born on March 15, 1961 and I have the 300 on the trunk lid and the copper pipes under the rams.  I'm wondering if this change was for both at the same time mid-year?

 

 

Mike 300G

 

 

----- Original Message -----

From: Charlie V cv300g@xxxxxxxxx [Chrysler300]

To: dverity@xxxxxxxxxxx ; Andy Mikonis

Cc: RICK AND DEBBIE CLAPHAM ; Chrysler 300 List ; Val Jeffers

Sent: Friday, August 17, 2018 5:47 PM

Subject: Re: [Chrysler300] 300G Heater Hose Routing

 

My " G " was born on May 10th and it has the copper heater tubes.

Charlie Valentine

On ‎Friday‎, ‎August‎ ‎17‎, ‎2018‎ ‎08‎:‎42‎:‎42‎ ‎PM‎ ‎EDT, Andy Mikonis r41hp@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

The G convertible test car in the August 1961 issue of Car Life, and the engine photo from the 300-G press kit do not have the copper tubes, so I think we can be sure that some Gs did not have the tubes.

On Aug 17, 2018, at 7:34 PM, dverity@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

My 300 G bought from the estate of the original owner did not have the copper pipes. There are plenty of them that did not have them. Like Andy said, no particular pattern, like the “300” trunk numbers.

Don

 

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Friday, August 17, 2018 8:09 PM

To: Chrysler 300 List ; Val Jeffers

Subject: Re: [Chrysler300] 300G Heater Hose Routing

 

 

I haven't seen any 300G without the copper heater lines, except the models with the rams in the trunk.

---

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of Val Jeffers edward1108@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: Friday, August 17, 2018 4:54 PM
To: Chrysler 300 List
Subject: [Chrysler300] 300G Heater Hose Routing

 

 

    Greetings all,

                          I have noticed several 300 G's that have the above laying across the top of the Ram Manifolds. I'm sure this is incorrect as they should be ran as copper tubing under the manifolds. Mine are copper under the manifolds.  Thoughts ?

                                                                                                       

                                                           Thanks,

 

                                                           Val J

__._,_.___

---

Posted by: "Michael Ashmore" <michael.ashmore@xxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___